AR01.20-D-5014A | Removing, installing cylinder head cover | 19.8.96 |
ENGINE 602.980 in MODEL 901, 902, 903, 904
D01.20-0002-06
2 Corrugated tube
3 Bolt (self-tapping)
4 Cylinder head cover
5 Gasket
6 Plug connections
7 Charge air hose
8 Crankcase ventilation line
| Removal, installation | ||
1 | Separate plug connections (6) of needle motion sensor and temperature sensor at intake manifold | ||
2 | Unplug connector at charge air hose (7) | ||
3 | Remove charge air hose (7) at top | Place down in engine compartment | |
4 | Detach crankcase ventilation line (8) at cylinder head cover (4) | ||
5 | Remove corrugated tube (2) | ||
6 | Unscrew bolts (3) of cylinder head cover | The cylinder head cover is attached with self-tapping bolts. | |
| |||
7 | Lift off cylinder head cover (4) together with gasket (5) | Inspect gasket (5) for damage, replace if necessary. Clean sealing surfaces. Installation: Pay attention to correct installation of gasket. | |
8 | Install in the reverse order |
Crankcase ventilation, cylinder head cover