ar0110d240001c

Removing and installing engine with removal fixture

유형 ar · 주제 01.10 · 버전 0108 · 2006-07-25

적용 대상: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 01 엔진 전체, 엔진 배기, 실린더 헤드, 실린더 크랭크케이스 › 01.10 엔진 전체 — 시리즈 901 (모델 0**, 6**) · 시리즈 902 (모델 0**, 6**) · 시리즈 903 (모델 0**, 6**) · 시리즈 904 (모델 0**, 6**)

EinPAS 15 엔진 › 15.15 연소 엔진 전체/엔진 블럭/크랭크 어셈블리 › 15.15.15 연소 엔진 전체 — 시리즈 901 (모델 0**, 6**) · 시리즈 902 (모델 0**, 6**) · 시리즈 903 (모델 0**, 6**) · 시리즈 904 (모델 0**, 6**)

엔진/변속기에도 적용: 111 979, 111 984

AR01.10-D-2400-01C

Removing and installing engine with removal fixture

Engine mounts, engine supports

Number

Designation

Engine 111.979

Engine 111.984

BA22.10-N-1002-01H

Engine support to front engine mount

Nm

83

83

Workshop equipment

WE58.40-Z-1020-11A

Removal fixture for engine

Removing and installing engine with removal fixture

D01.10-1001-01

1 Move in engine removal fixture, attach stop parts to engine and raise engine slightly.

Before raising engine, set center of gravity and tighten clamping bolt (arrow).

Removing and installing engine with removal fixture
Removing and installing engine with removal fixture

D22.10-1004-01

D22.10-1003-01

2 Slacken engine supports (1 and 5) at both engine mounts (4 and 8), raise engine further and pull out.

Installation: Place engine slightly onto the engine mounts (4 and 8), screw in the securing bolts (2 and 6) and tighten by hand until they make contact. Then, lower engine fully and tighten securing bolts (2 and 6) to the final torque.
Pay attention to tightening torque.