P01.00-2406-09
1 Release plug (1) and unplug from ME control unit (N3/10).
2 Disconnect electrical connector (2).
3 Separate tie strap and place engine wiring harness to the side.
4 Dismount nut (3), slacken nut (4) and dismount electrical line circuit 30 (5) from battery (G1).
5 Detach seal (6) from partition wall and place engine wiring harness on cylinder head cover.
6 Dismount ground line (7) from longitudinal member.
7 Disconnect plug from backup lamp switch (S16/2).