Cylinder head
P01.00-2413-09
1 Disconnect plug (1) from intake camshaft Hall sensor, left (B6/4).
2 Disconnect plug (2) from intake camshaft Hall sensor, right (B6/5).
3 Disconnect plug (3) from coolant temperature sensor (B11/4).
4 Disconnect plug (4) from air pump switchover valve (Y32).
5 Disconnect plug (5) from camshaft exhaust solenoid (Y49).
6 Disconnect ground line (6) from front cover.
7 Unplug connector (7) of the circuit 61 (D+) electrical connection from alternator (G2).
8 Unclip electrical line of the connector (7) from mounting clips and pull upwards.
9 Expose engine wiring harness and remove from cylinder head cover.
Installation: Check that engine wiring harness is correctly routed to the cylinder head cover (arrow).