000 589 13 99 00
Unlocking device with RK 1.5 ejector
Wiring harness repair kit, basic
New passenger vehicle wiring harness repair kit
220 589 04 99 00
220 589 01 99 20
P54.18-2558-06
Unpin contact pins from the connector
1 Insert release tool with RK 1.5 ejector from front side into contact cavity of connector (1).
If high pressure is applied, the bridges of the contact cavities may break.
Spring shackles at contact pin (2) are pressed together with sleeve (3) of release tool with RK 1.5 ejector.
2 Press contact pin (2) from its seat in housing using plunger (4) on release tool with RK 1.5 ejector against spring force of tool.
3 Gently pull the respective line to remove the contact pin (2) from the connector (1).