000 589 13 99 00
Blade holder with clamping pliers
Wiring harness repair kit, basic
New passenger vehicle wiring harness repair kit
MCP 2.8 / Fl blade. 2,8
220 589 04 99 00
220 589 01 99 50
220 589 01 99 59
MCP 2.8 / Fl blade. 2.8 / JPT / SPT
000 589 13 99 30
P00.19-2961-01
Unfasten secondary release on version with lock tab
1 Using a suitable tool, lift locking shackles (1) in direction shown by arrow.
P00.19-2958-01
Unfasten secondary release on version with coupling cap (shown on micro quadlock system with Multi Contact Point coupling)
2 Using a suitable tool (1), pry up lock tab (2) for coupling cap (4).
3 Pull clutch housing (3) from coupling cap (4) in direction shown by arrow.
P54.18-2470-01
Unfasten secondary release on version with retaining cage (shown on micro quadlock system with Multi Contact Point coupling)
4 Using a suitable tool (1), slide retaining cage (2) into pre-locking position in direction shown by arrow.
P54.18-2571-06
Unpin female contacts from coupling
5 Insert blade holder with clamping pliers with MCP 2.8/Fl. 2.8 blade or MCP 2.8/Fl. 2.8/JPT/SPT blade from the front through the openings in contact cavity of coupling (1).
This step compresses the spring shackles (2) on the female contact.
6 A slight tug on the corresponding cable will remove the female contact (1) from the coupling.