ap8620m8653a

Check lift function

유형 ap · 주제 86.20 · 버전 0101 · 2005-08-23

적용 대상: MODEL 903.662 Minibus Sprinter Mobility, Straight-line lift in rear

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 86 비상장치, 장애인용　사양, 위생　장비, 부엌 › 86.20 장애인용 사양 — 시리즈 903 (모델 662)

EinPAS 37 내부 사양 › 37.60 승하차 보조 › 37.60.40 리프트 — 시리즈 903 (모델 662)

AP86.20-M-8653A

Check lift function

1.7.04

MODEL 903.662
Minibus Sprinter Mobility,
Straight-line lift in rear

Check lift function

M86.20-0004-06

1 Lift platform

2 Operating unit

3 Cover

4 Thumb screw

5 Pipe of hand pump

6 Oil dipstick

7 Rollaway securing device

Remove

1

Remove pipe of hand pump (5), remove thumb screws (4) and remove cover (3) from hydraulic unit

Check

2

Lower the lift platform (1) by pressing the "Down" button on the operating unit (2)

The lifting platform (1) must lower evenly and smoothly.

When the lift platform (1) is placed on the ground the rollaway securing device (7) must fold up completely.

The turn signal lamps must flash as soon as the lowering process starts.

3

Check all moving parts (arrows) on lift for visible wear

If necessary:

Replace worn parts

- subject to a separate repair order.

4

Check hydraulic lines, hydraulic unit and both hydraulic cylinders for visible leaks

If necessary:

Eliminate leaks

- subject to a separate repair order.

5

Raise the lifting platform (1) by pressing the "Up" button on the operating unit (2)

The lifting platform (1) must raise evenly and smoothly.

The turn signal lamps must go out as soon as the lifting platform (1) has reached the final position.

6

Check oil level on the oil dipstick (6)

Only in the final position of the

lifting platform (1). If necessary:

- Correct the oil level.

- subject to a separate repair order.

Automatic transmission fluids (ATF, specification 236.7)

BB00.40-P-0236-07A

Install

Mount cover (3) on hydraulic unit, screw in thumb screws (4) and insert pipe of hand pump (5)

참조 문서