P47.20-2178-07
1 Insulation mat
2a, 2b Electrical connector
3 Fuel filter
6 Fuel tank
7 Clamp
8 Fuel lines
3a Sealing ring
4 Nut
5 Ring
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Close Vario roof | ||
2 | Empty fuel tan (6) | ||
| Empty fuel tank, fill | ||
3 | Remove top tank cover | ||
| Remove/install upper tank cover | ||
4 | Turn around insulation mat (1) toward top | ||
5 | Unlock electrical connector (2a) on fuel filter (3) and disconnect | ||
6 | Unscrew nuts (4) | Nut, fuel filter to fuel tank | |
7 | Remove ring (5) | ||
8 | Remove fuel filter (3) from fuel tank (6) | Collect dripping fuel with absorbent rag. | |
9 | Release and detach electrical connector (2b) | ||
10 | Remove clamp (7) | ||
11 | Detach fuel lines (8) from fuel filter (3) | ||
12 | Replace fuel filter (3) | Installation: Replace sealing ring (3a). To position, during installation of sealing ring (3a), coat three points, evenly distributed over the circumference, with a little multipurpose grease. Install ring (5) with part number to the outside and tighten nuts crosswise. | |
Multipurpose grease | |||
13 | Install in the reverse order |
Fuel tank
Repair materials
Number | Designation | Order number |
BR00.45-Z-1008-06A | Silicone-based grease | A 001 989 28 51 10 |
참조 문서
- ar4710p4001v
- ar6420p1080v
- as4700z000101a 인화에 의한 폭발 위험, 연료의 흡입 및 음용에 의한 중독 위험, 연료의 피부 및 안구 접촉에 의한 상해 위험