Vehicles with engine OM 904.9 LA (example) |
S10 | Engine actuation switch |
S11 | Engine stop switch |
B01.00-0008-01
1 | Oil reservoir plug |
a | Maximum Level |
b | Minimum Level |
B46.00-0024-01
| Check | ||
1 | Turn the ignition key to the ON position, without running the engine | If the hydraulic steering fluid is cold, run the engine at idle speed and turn the steering several time to both sides, to heat the fluid. Then, stop the engine and keep the ignition key ON. | |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
2 | Tilt the cabin | ||
| |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
3 | Start the engine | In vehicles with 904.9 engine, start switch S10. | |
4 | Remove the reservoir lid (1) and clean it with a clean cloth | ||
5 | Reinstall the lid (1) and remove it again to check the level | If the steering system is correctly refueled, the fluid level with the engine running, at idle speed, must be located withing the Max. (a) and Min. (b). | |
The fluid level must not exceed the indication of maximum level . | |||
Refill | |||
6 | If the fluid is at the minimum level height or below it, add the recommended fluid up to the reservoir maximum level | ||
7 | Stop the engine | With the engine OFF, the oil level must increase from 1 to 2 centimeters beyond the maximum level reference mark. | |
If the fluid level raises more than 2 centimeters, it is an indication of air in the hydraulic circuit, and the system bleeding is required. | |||
| |||
Bleed the steering system | |||
|
| ||
8 | Return the cab | ||
|
참조 문서
- ar4625b3300c
- ar6080b0010d
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as6080z000101a 캡이 틸팅될 때 신체의 일부가 끼이거나 눌려서 발생하는 상해 위험