ap4210p4251ff

Check lining thickness of brake pads and condition of brake disks

유형 ap · 주제 42.10 · 버전 0104 · 2006-03-21

적용 대상: MODEL 454.0

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 42 브레이크-유압장치 및 기계장치 › 42.10 상용 브레이크 — 시리즈 454 (모델 0**)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.15 주 브레이크/진공압 시스템 › 21.15.40 전방 서비스 브레이크 — 시리즈 454 (모델 0**)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.15 주 브레이크/진공압 시스템 › 21.15.42 후방 서비스 브레이크 — 시리즈 454 (모델 0**)

AP42.10-P-4251FF

Check lining thickness of brake pads and condition of brake disks

7.10.03

MODEL 454.0

Check lining thickness of brake pads and condition of brake disks

P42.10-2529-11

Shown on front axle

1 Brake disk

2 Brake pads

Check

1

Check lining thickness of brake pads (2) on the front and rear axle

Check brake pads when installed (2). Observe recommended service limit so that service limit is not dropped below up to the next maintenance service.

If necessary:

Replace brake pads (2)

- subject to separate repair order.

Replacing and installing brake pads

Front axle

AR42.10-P-0170FF

Rear axle

AR42.10-P-0170FG

2

Check brake disk (1) on front and rear axle for score marks and cracks

If necessary:

Replace brake disk (1)

- subject to separate repair order.

Remove/install front axle brake disk

AR42.10-P-0230FF

Removing and installing rear axle brake disc

AR42.10-P-0240FF

참조 문서