Rear axle - setting adjustment screw with sliding block

유형 ap · 주제 35.30 · 버전 0315 · 2011-04-08

적용 대상: REAR AXLE 742.487 /501 /505 in MODEL 670 REAR AXLE 742.501 /505 in MODEL 668 REAR AXLE 770.000 in MODEL 970.0 /2, 972.0, 975.2 REAR AXLE 770.001 in MODEL 375.1, 970.0 /2, 975.0 /2, 976.0 REAR AXLE 770.002 in MODEL 970.0 /3, 972.0 /3, 976.3 REAR AXLE 770.003 in MODEL 970.3, 972.3, 976.3 REAR AXLE 771.000 in MODEL 970.0 /2 /6, 974.2, 975.2, 976.0 REAR AXLE 771.001 in MODEL 970.0 /2 /3, 972.0 /3, 976.0 /3 REAR AXLE 771.002 in MODEL 976.3 REAR AXLE 771.102 in MODEL 375.1, 970.0 /2 /6, 974.2, 975.2,

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

AP35.30-D-3560A

5.4.11

REAR AXLE 742.487 /501 /505 in MODEL 670

REAR AXLE 742.501 /505 in MODEL 668

REAR AXLE 770.000 in MODEL 970.0 /2, 972.0, 975.2

REAR AXLE 770.001 in MODEL 375.1, 970.0 /2, 975.0 /2, 976.0

REAR AXLE 770.002 in MODEL 970.0 /3, 972.0 /3, 976.3

REAR AXLE 770.003 in MODEL 970.3, 972.3, 976.3

REAR AXLE 771.000 in MODEL 970.0 /2 /6, 974.2, 975.2, 976.0

REAR AXLE 771.001 in MODEL 970.0 /2 /3, 972.0 /3, 976.0 /3

REAR AXLE 771.002 in MODEL 976.3

REAR AXLE 771.102 in MODEL 375.1, 970.0 /2 /6, 974.2, 975.2, 976.0

REAR AXLE 771.103 in MODEL 970.0 /2 /3, 972.0 /3, 976.0 /3

Rear axle - setting adjustment screw with sliding block

N35.00-0280-01

N35.00-0279-01

1 Adjustment screw

2 Jam nut

3 Sliding block

1	Slacken lock nut (2)	 Counterhold the adjustment screw (1).
2	Screw in adjustment screw (1) until sliding block (3) touches edge of ring gear	 Counterhold the jam nut (2).
3	Set gap by unscrewing the adjustment screw (1)	 Unscrew the adjustment screw (1) on:  rear axle 742.4/5 by 45°  rear axle 770.00 by 60°  rear axle 771.00/10 by 90°
4	Tighten lock nut (2).	 Counterhold the adjustment screw (1) when doing so.
			*BA35.10-N-1003-03D

 Rear axle

Number	Designation			Rear axle 742.4/5	Rear axle 770.00	Rear axle 771.00/10


BA35.10-N-1003-03D	Lock nut to adjusting screw	M26	Nm	100	100	100
		M30	Nm	-	-	-