N28.80-0201-01
1 Oil filler plug
2 Oil drain screw
3 Oil inspection plug
1 | Clean transmission | ||
2 | Undo oil filler screw (1), oil drain screw (2) and oil inspection screw (3) | Inspect and replace sealing ring, if necessary | |
3 | Drain oil | Drain oil when warm. | |
4 | Screw in oil drain plug (2) | | |
5 | Pour in oil | Fill until the lubricant reaches the lower edge of the inspection hole. | |
| |||
6 | Turn in oil filler screw (1) and oil inspection screw (3) | | |
|
Reversing gear housing
Number | Designation | Reversing gear 750.893 | |
BA28.80-N-1001-01A | Oil drain screw at transmission housing | Nm | 50 |
BA28.80-N-1002-01A | Oil filler screw to transmission housing | Nm | 50 |
BA28.80-N-1003-01A | Oil inspection screw to transmission housing | Nm | 50 |
Transfer case