AP25.20-D-2981A | Clutch actuation - replace brake fluid | 19.1.09 |
MODEL 668.###, 670.### ## up to 099977
with CODE (B16) Hydraulic 2-circuit / compressed air 2-circuit brakes
with CODE (GF1) Transmission 710.6 (S 5-42)
N25.20-0212-01
N25.20-0210-01
1 Expansion reservoir
3 Bleed valve
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | All models | |
1 | Unscrew cap of expansion reservoir (1). | Drain old brake fluid. | |
The level of the brake fluid should still extend to above that of the supply opening. | |||
2 | Connect bleeder unit | Pay attention to manufacturer's operating instructions. | |
Bleeder unit, pneumatic | |||
Bleeder unit, electric | |||
3 | Connect drain hose of brake fluid collector onto vent valve (3) of the clutch slave cylinder | Remove dust cap. | |
4 | Open bleeder valve (3) | Until new brake fluid exits free of bubbles at the bleed hose. | |
| |||
5 | Close the bleed valve (3) | ||
6 | Disconnect drain hose of brake fluid collector from vent valve (3) of the clutch slave cylinder | Press on dust cap. | |
7 | Disconnect bleeder unit | Pay attention to manufacturer's operating instructions. | |
8 | Correct fluid level in expansion reservoir (1) | ||
9 | Screw on cap of expansion reservoir (1). |
Clutch mechanism
참조 문서
- ah4250p000101a 브레이크액 관련 지침
- as4250z000101a 브레이크액 음용으로 인한 중독 위험, 브레이크액이 피부 또는 눈에 닿아 발생하는 상해 위험