ap1820g010004b

Replace oil filter element

유형 ap · 주제 18.20 · 버전 0106 · 2011-11-18

적용 대상: ENGINE 900.91 /92, 902.92 /93, 904.92 /95, 906.935 /95, 924.91 /92 /93, 926.96

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 18 엔진윤활, 엔진냉각 › 18.20 오일필터 — 시리즈 900 (모델 91*, 92*) · 시리즈 902 (모델 92*, 93*) · 시리즈 904 (모델 92*, 95*) · 시리즈 906 (모델 935, 95*)

EinPAS 15 엔진 › 15.20 엔진 윤활 시스템 › 15.20.31 필터/냉각/서모스탯/팬/탱크 — 시리즈 900 (모델 91*, 92*) · 시리즈 902 (모델 92*, 93*) · 시리즈 904 (모델 92*, 95*) · 시리즈 906 (모델 935, 95*)

엔진/변속기에도 적용: 924 91*, 924 92*, 924 93*, 926 96*

AP18.20-G-0100-04B

Replace oil filter element

Oil filter

Number

Designation

Engine
900.91/92, 902.92/93, 904.92/95, 906.935/95, 924.91/92/93, 926.96

BA18.20-N-1003-01M

Oil filter cover to oil filter housing

Nm

25

Replace oil filter element

Socket wrench insert WAF 94 mm
(14-point)

366 589 01 07 00

Replace oil filter element

G18.20-3120-02

1 Unscrew threaded cap (1) of oil filter using socket wrench insert, size 36 or
socket wrench insert, size 94 mm (14 point) and drain oil from oil filter housing.

2 Remove screw cap (1) with oil filter element (3) and remove the oil filter element (3) by pressing on the side.

Ensure that no foreign matter gets into the oil filter housing. Never wipe out the oil filter housing.

3 Replace the sealing ring (2) and install a new oil filter element (3) into the screw cap (1).

Grease the sealing ring (2) slightly.

4 Insert threaded cap (1) with oil filter element (3) into oil filter housing and tighten using socket wrench insert, size 36 or socket wrench insert, size 94 mm (14 point).