ap0850d0004te

Replace coolant for auxiliary circuit

유형 ap · 주제 08.50 · 버전 0101 · 2019-12-10

적용 대상: Engine 780.703 in model 910

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 08 전기 구동장치, 하이브리드 구동 장치 › 08.50 온도 매니지먼트 — 시리즈 910

EinPAS 16 연료/에너지 공급, 엔진 › 16.25 고전압 시스템/연료 전지 › 16.25.5 고전압/연료전지-냉각/히팅 시스템, 전체 — 시리즈 910

엔진/변속기에도 적용: 780 703

AP08.50-D-0004TE

Replace coolant for auxiliary circuit

09.12.2019

Engine

780.703 in model 910

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Check

1

Check all coolant lines and coolant hoses for leak tightness and condition.

2

Check coolant expansion reservoir for leak tightness and condition.

Replace coolant

3

Drain coolant of auxiliary circuit then fill again.

AR08.50-D-0022TE

If the coolant is too strongly dirt-laden,

clean auxiliary circuit.

After obtaining special order.

4

Confirm replacement of coolant in maintenance booklet or in Digital Service Booklet (DSB).

참조 문서