an8830s002501pp
Prepare bumper body-styling bar for installation
유형 an · 주제 88.30 · 버전 0101 · 2020-06-15
적용 대상: Model 470, 471 with code ZJ7 (Model for Australia) except code EZ8 (PARKTRONIC Park Assist) except code JS1 (360° camera (SURROUND VIEW))
“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.
위치
기능 그룹 3 구조 › 88 부착부품, 외측 플랩 › 88.30 부착부품, 언더라이드 보호장치 — 시리즈 470 · 시리즈 471
EinPAS 35 바디/프레임/부착 부품 › 35.38 범퍼/스포일러/외부 패널/보관함/프런트 보호 › 35.38.3 추가 장착/개조 — 시리즈 470 · 시리즈 471
AN88.30-S-0025-01PP
| Prepare bumper body-styling bar for installation
|
|
|
Model
| 470, 471
|
|
| with code ZJ7 (Model for Australia)
|
|
| except code EZ8 (PARKTRONIC Park Assist)
|
|
| except code JS1 (360° camera (SURROUND VIEW))
|
Detachable parts, body-styling bar, crossmember
|
Number
| Designation
|
| Model 470, 471
|
BA88.30-N-1011-01P
| Screw, front fog lamp to body-styling bar bracket
| Nm
| 5
|
Detachable parts, body-styling bar, crossmember
|
Number
| Designation
|
| Model 470, 471
|
BA88.30-N-1012-01P
| Nut, radar sensor bracket to body-styling bar
| Nm
| 8
|
Detachable parts, body-styling bar, crossmember
|
Number
| Designation
|
| Model 470, 471
|
BA88.30-N-1013-01P
| Nut, antenna bracket to body-styling bar
| Nm
| 50
|
Detachable parts, body-styling bar, crossmember
|
Number
| Designation
|
| Model 470, 471
|
BA88.30-N-1014-01P
| Screw, bumper antenna to antenna bracket
| Nm
| 5
|
Detachable parts, body-styling bar, crossmember
|
Number
| Designation
|
| Model 470, 471
|
BA88.30-N-1017-01P
| Nut, bracket to body-styling bar
| Nm
| 50
|
1
| Install stop plugs (5).
|
2
| Remove the air grille (3).
|
|
| To do so, remove the expansion rivets (2).
|
3
| Install the air grille (4).
|
|
| To do so, use the previously removed expansion rivets (2).
|
4
| Attach the radar sensor (9) to the body-styling bar (1) with nuts (11) and screws (10). .
|
5
| Connect the electrical wiring harnesses (8) to the front fog lamps (7).
|
6
| Attach the front fog lamp (7) to the body-styling bar (1) with screws (6). .
|
7
| Fasten the holder (18) with screws (15), washers (16) and nuts (17) to the body-styling bar (1) .
|
8
| Attach the bumper antenna (20) to the holder (18) with screws (19). .
|
9
| Fasten the holder (24) with screws (21), washers (22) and nuts (23) to the body-styling bar (1) .
|
