an8288w000109d

Prepare console housing for on-board unit for installation and install

유형 an · 주제 82.88 · 버전 0200 · 2003-08-15

적용 대상: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F04) Cab L (long) with CODE (DD2) Cab with 1550 mm floor-to-ceiling height except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD3) Lowered cab with low roof Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph FTCO MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F05) M-cab (medium-long) exce

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.88 자동　요금징수시스템 — 시리즈 950 (모델 0**, 1**, 2**, 3**) · 시리즈 952 (모델 0**, 1**, 2**, 3**) · 시리즈 953 (모델 1**, 3**) · 시리즈 954 (모델 0**, 1**, 2**)

EinPAS 31 커뮤니케이션/정보/엔터테인먼트 › 31.35 태코그래프/통행료 시스템 › 31.35.3 추가 장착/개조 — 시리즈 950 (모델 0**, 1**, 2**, 3**) · 시리즈 952 (모델 0**, 1**, 2**, 3**) · 시리즈 953 (모델 1**, 3**) · 시리즈 954 (모델 0**, 1**, 2**)

AN82.88-W-0001-09D

Prepare console housing for on-board unit for installation and install

Modification notes

17.7.03

Procedure modified

Steps 1 to 5

Prepare console housing for on-board unit for installation and install

W82.88-1058-11

1 Remove protective foil from the support webs (4) of the bracket (3).

2 Insert bracket (3) into the housing box (2) and when doing so guide wiring harness (5) through the bracket (3).

3 Position bracket (3) on left and at rear in the housing box (2) and adhere to the bottom of the housing box (2).

4 Connect cover panel to the housing box (2).

W82.88-1113-11

5 Insert sheet-metal frame (1) through the opening in the cover panel (6) into the bracket (3) and bend the retainer tabs.