AD07.52-D-6010-02A | PEC test of control module programming transmission recognition |
| Scope of test | Measuring instrument/Test connection | Operation/ Requirement | Specified value | Possible cause/ Remedy | ||
1.0 | Manual/automatic transmission not recognized or incorrectly recognized Ground coding Manual transmission only |
| |
5 (1.5) | Ignition: OFF Coupling "1" disconnected at control module | < 5 Ω | Cable Ground connection at W7 |
1.1 | Recognition of drive stage (selector lever position P/N) Automatic transmission only |
| |
5 (1.5) | Ignition: ON Selector lever position: P/N R/4/3/2/1 |
< 1 V 11 - 14 V | Cables Starter lock-out switch |
1.2 | Vehicle speed signal | | > D10D Drive at >10 km/h Control module programming | Manual or automatic transmission recognized | |||