Change parts list version type (SAA) of injection nozzles
1
Call up VeDoc.
2
Enter vehicle identification number (VIN) and click on "Search".
3
Change on index card "SAA numbers".
4
Redocument the following variant parts lists (SAA): Injection nozzles/pressure pipe connections: SAA old: 505137/20 to SAA new: 505137/35
Add code of engine version
5
Change on index card "Codes".
6
Add code MS7 (BlueTEC EEV).
Enter field organization (AO) text
7
Change on index card "AO -texts".
The index card is still shown against a gray background if no entries were present there previously.
8
Click on "Add" button on right in picture.
9
Set a hook in the field for design group 01 in the new open window.
10
Enter the following AO text: The vehicle was converted to the EEV emissions standard on (dd.mm.yyyy) by service operation (xxxx dealer number). In the case of later engine damage/engine replacement the necessary engine variant must be determined via query in the Xentry Support Feedback [XSF] system.