B88.40-0004-06
1 Engine hood
2 Engine hood fastening screws
3 Electric wiring harnesses for headlights and position lights
4 Engine hood opening spring
A Special tool
| Remove and install | ||
Danger! | Risk of accident by involuntary movement with the engine running. Risk of injury of crushing and burning for contact during start procedure or with functioning engine | Shim vehicle against involuntary movement. Wear work clothes well closed and attached to the body. Do not touch hot or moving parts. | |
Danger! | Risk of injury by compression or arrest when opening and closing the engine hood | Keep people and objects out of the area while tilting the engine hood. | |
1 | Tilt the engine hood (1) | ||
2 | Disconnect the electric wiring harnesses (3) for headlights and position lights on both sides | Make sure the vehicle ignition is off. Remove plastic covers and locking devices from the connectors. | |
3 | Cut the plastic cable fasteners and move the wiring harnesses (3) out of the way | Install: Install new plastic cable fasteners. | |
4 | Support the engine hood (1) | Take sufficient care not to damage the engine hood. | |
5 | Remove the opening springs (4) from the engine hood (1) | | |
| |||
6 | Loosen and remove the screws (2) fastening the engine hood (1) to the cross member | Install: Install new self-locking nuts. | |
| |||
7 | Remove the engine hood (1) | Take sufficient care not to damage the engine hood. Install: The engine hood installation requires hood adjustment. | |
8 | Install in reverse order |
Engine hood
Número | Denominação | Cab 384.8, 694.8, 696.8 | |||
BA88.40-B-1001-01A | Bolt fastening the engine hood to the cross member | M10 | Nm | 65 | |
M12 | Nm | 110 | |||
055 589 04 31 00
Device
055 589 00 37 00
Pressure pliers