Remove/install flame monitor

AR83.70-W-5682E

6.3.07

MODEL 375.4 with BODY 375.860 with CODE (HH1) "Eberspächer D5W S" warm water auxiliary heater

MODEL 940, 942, 943, 944 with BODY 944.890 with CODE (HH1) "Eberspächer D5W S" warm water auxiliary heater

W83.70-1389-01

1 Auxiliary heating control unit

2 Combustion air blower panel

W83.70-1390-06

3 Plug housing

4 Electrical lines for flame monitor

5 Flame monitor

 	Remove/install
1	Remove heater unit		AR83.70-W-5302M
2	Remove auxiliary heater control unit (1)		AR83.70-W-5937E
3	Remove panel for combustion air blower (2)	 Installation: Do not damage the heat-protection mat.
4	Detach electrical lines for flame monitor (4) from contact cavities 1 and 2 of connector housing (3)		*220589019950
			*220589019954
5	Remove flame monitor (5)		*BA83.70-N-1023-03A
6	Install in the reverse order

 Auxiliary heater heating unit

Number	Designation		Model 375.4 with body 375.860 with (CODE HH1) Warm water auxiliary heater "Eberspächer D5W S"	Model 940, 942, 943, 944 with body 944.890 with (CODE HH1) Warm water auxiliary heater "Eberspächer D5W S"


BA83.70-N-1023-03A	Flame monitor in blower housing	Nm	3	3

220 589 01 99 54

MT 3 blade

Blade holder with clamping pliers

220 589 01 99 50