1 | Front trim |
2 | Evaporator unit paneling |
3 | Center trim |
4 | Rear trim |
D83.50-1264-12
| Remove/install | ||
1 | Unclip air vents of front paneling (1) and rear paneling (4) | ||
2 | Unclip dome lamps and disconnect electrical lines | ||
3 | Remove screws/bolts of front paneling (1), center paneling (3) and rear paneling (4) | ||
4 | Detach front paneling (1) from air duct toward front until electrical line of dome lamp can be guided through front paneling (1) | Installation: Ensure that electrical line is routed properly and front paneling (1) is seated correctly. | |
5 | Guide electrical line of dome lamp through front paneling (1) and remove front paneling (1) | ||
6 | Detach rear paneling (4) from air duct toward rear until electrical line of dome lamp can be guided through rear paneling (4) | Installation: Ensure that electrical line is routed properly and rear paneling (4) is seated correctly. | |
7 | Guide electrical line of dome lamp through rear paneling (4) and remove rear paneling (4) | ||
8 | Detach center paneling (3) from air duct toward rear until electrical line of dome lamp can be guided through center paneling (3) | Installation: Ensure that electrical line is routed properly and center paneling (3) is seated correctly. | |
9 | Guide electrical line of dome lamp through center paneling (3) | ||
10 | Guide center paneling (3) out of guide of air duct at left and right and remove | ||
11 | Unclip air intake grille of evaporator unit paneling (2) | ||
12 | Remove screws/bolts of evaporator unit paneling (2) | ||
13 | Unclip and remove evaporator unit paneling (2) | Installation: Ensure that evaporator unit paneling (2) is seated correctly. | |
14 | Install in the reverse order |