Adjust cables of emergency release for sliding door

AR72.16-D-2214A

Adjust cables of emergency release for sliding door

05.12.2019

Model

906.657

with code P0E (Sprinter Tourer master code)

with code T16 (Sliding door right)

with code T55 (Electric operation of sliding door on right)

Model

906.657

with code P0F (Master code for Sprinter Tourer 19+1 Inland)

with code T16 (Sliding door right)

with code T55 (Electric operation of sliding door on right)

Model

906.657

with code P0G (Master code Sprinter Tourer 16+1)

with code T16 (Sliding door right)

with code T55 (Electric operation of sliding door on right)

Model

906.657

with code P0H (Master code Sprinter Tourer 19+1)

with code T16 (Sliding door right)

with code T55 (Electric operation of sliding door on right)

Model

906.657

with code PE4 (DCAA bus master code, Argen)

with code T16 (Sliding door right)

with code T55 (Electric operation of sliding door on right)

Model

906.657

with code PE5 (Mastercode, bus seats on raised base, Argen)

with code T16 (Sliding door right)

with code T55 (Electric operation of sliding door on right)

1

Lever

6

Cable

10

Cable

2

Inner sliding door emergency release

7

Switches

11

Rocker

3

Lever

8

Bracket

12

Adjustment screws

4

Outer sliding door emergency release

9

Cable

13

Cable

5

Lever

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Unlock outer sliding door emergency release (4) with key

2

Remove lower sliding door paneling

MODEL 906.657 except CODE ZO1 (James Cook Compact camper) except CODE ZO2 (James Cook Classic camper)

AR72.16-D-6610G



Check

3

Check control cable (6) on outer sliding door emergency release (4) for damage and ease of movement

If control cable (6) is damaged or sluggish.



Install new cable (6).

Route cables for closing system

AR72.16-D-2210-02A

4

Check control cable (9) on motor coupling lock for damage and ease of motion

If control cable (9) is damaged or sluggish.



Install new cable (9).

Remove, install drive motor for electric sliding door

AR72.29-D-5900A

5

Check control cable (10) on door lock for damage and ease of motion

If control cable (10) is damaged or sluggish.



Replace cable (10).

Route cables for closing system

AR72.16-D-2210-02A

6

Check control cable (13) on inner sliding door emergency release (2) for damage and ease of movement

If control cable (13) is damaged or sluggish.



Install new cable (13).

Route cables for closing system

AR72.16-D-2210-02A

7

Check rocker (11) for ease of movement

If rocker (11) is sluggish.



Remove rocker (11), free up and install again, or install new one.

Adjust

8

Unfasten counternuts on adjustment screws (12) and screw in adjustment screws (12)

 Screw in adjustment screws completely.

9

Move inner sliding door emergency release (2) to basic position

 The lever (1) for inner sliding door emergency release (2) must make contact at top and cover must be closed.

10

Move outer sliding door emergency release (4) to basic position

 The levers (3, 5) of outer sliding door emergency release (4) must be positioned horizontally. The switch (7) is not actuated and is open.

11

Move rocker (11) into basic position

 The edge (arrow B) of the rocker (11) should be parallel to the edge (arrow A) of the bracket (8).

12

Adjust play of control cables (6, 13)

 Unscrew adjustment screws (12) until play in each case is present on both control cables (6, 13).

Play, cable for emergency release on sliding door

*BE72.16-N-1009-01C

If the play of the control cables (6, 13) cannot be adjusted with the adjustment screws (12).



Move cable clamps on control cables (6, 13) and repeat adjustment of play of control cables (6, 13).

13

Tighten counternuts on adjustment screws (12)



Check

14

Operate lever (1) on inner sliding door emergency release (2), then open sliding door and move

 The motor coupling should unlock completely; the door lock and the additional lock are also unlocked.

15

Close sliding door

16

Operate lever (3) on outer sliding door emergency release (4), then open sliding door and move

 The motor coupling should unlock completely; the door lock and the additional lock are also unlocked.



Install

17

Install lower sliding door paneling

MODEL 906.657 except CODE ZO1 (James Cook Compact camper) except CODE ZO2 (James Cook Classic camper)

AR72.16-D-6610G

Learn in electric sliding door

18

Completely open sliding door with switch on center console and close again



Check

19

Perform function test

Check values for sliding doors

Number

Designation

MODEL 906.6/7 with CODE T55/T56

BE72.16-N-1009-01C

Play, cable for emergency release on sliding door

mm

3...5