Model | 405.100/101/102/103/120/121/122/123/200/201/220/221 |
with code H63 (VarioPower (power hydraulic), closed circuit) | |
Model | 405.100/101/102/103/120/121/122/123/200/201/220/221 |
with code H64 (VarioPower (power hydraulic), open circuit) | |
Model | 405.100/101/102/103/120/121/122/123/200/201/220/221 |
with code H65 (VarioPower (power hydraulic), closed+open circuit) |
Shown on hydraulics output unit (A23) with oil level indicator for power hydraulics |
1 | Button (volume selection of volume flows between circuit I and circuit II) |
2 | Button (flow summation of volumetric flow rates between circuit I and circuit II on connections of circuit II) |
3 | Luminescent band display |
4 | Oil level indicator (green scale) |
A23 | Hydraulics output unit |
G54.25-3458-71
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Danger ! | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
Initial startup | |||
1 | Switch off ignition | ||
2 | Install hydraulics output unit (A23) | Only if not installed. | |
All electrical connections of the hydraulic circuits must be connected. When exchanging the hydraulics output unit (A23) or the initial commissioning of the power hydraulics, a general teach-in process or a teach-in process for circuit IV must be carried out. | |||
3 | Carry out teach-in process for detecting hydraulic circuits | ||
4.1 | Check oil level of power hydraulics | Without oil level indicator (4) on hydraulics output unit (A23). | |
| |||
4.2 | Perform teach-in process for scaling of fill level sensor | With oil level indicator (4) on hydraulics output unit (A23). | |
Model 405 with power hydraulics except code H97 (Carboxylic acid ester for hydraulic system)Engine oil SAE 10 W | |||
Model 405 with power hydraulics with code H97 (Carboxylic acid ester for hydraulic system)Panolin HLP synthetic 46 (HLP/HLP-D46, ISO-VG) | |||
5 | Carry out teach-in process for power hydraulics of circuit IV | Model 405.100/101/102/103/120/121/122/123/200/201/220/221 | |
| 000 588 04 21 00 Measuring instrument | ||
Flow rate measurement for power hydraulics circuit IV | |||
6 | Carry out flow and pressure measurement for power hydraulics of circuit III and circuit IV |
参照文書
- ap5530g5512b パワー・ハイドロリック・オイル・レベルの点検、修正
- ar5530g000401b
- ar5530g000402b
- ar5530g000404b
- ar5530g0006b
- as0000z000501a エンジン作動中に車両がひとりでに動き出す危険があります。 スタート時または作動中のエンジンに接触すると、巻き込まれて負傷をする、または火傷をする危険があります。
- as0000z001301a ハイドロリック·オイルはまちがって飲用したり、皮フへ付着したりすると危険です。
- ws5500n3012b