AR46.40-B-0100TA | Remove/install drag link | 12.02.16 |
Steering gear 765.82, 765.83 with Vehicle 958
Steering gear 766.49 with Vehicle 958.0, 958.1, 958.2
W46.40-0011-04
1 Pitman arm
2 Nut
3 Steering shaft
4 Puller
| Remove | ||
| Notes about self-locking bolts and nuts | ||
1 | Turn the steering wheel to the right | ||
2 | Loosen nut (2) in the Pitman arm (1) and in the steering lever | ||
3 | Loosen the steering shaft (3) in the Pitman arm (1) and in the steering lever | The steering shaft loosens with light impacts. | |
Puller | |||
4 | Loosen nut (2) and remove the steering shaft (3) | ||
| Install | ||
5 | Install the steering shaft (3) in the Pitman arm (1) and in the steering lever | When using a new steering shaft: | |
Check if the steering is centralized in the steering gear. If necessary, adjust it. | |||
Steering gear 765.82, 765.83 | |||
Steering gear 766.49, | |||
6 | Install a new nut (2) in the Pitman arm (1) and in the steering lever | |
Steering linkage
Número | Denominação | Chassis 958.0/2/4 | |||
BA46.40-B-1001-06B | Lock nut of track rod ball joints | M14x1.5 | Nm | 100 | |
M18x1.5 | Nm | 170...185 | |||
M20x1.5 | Nm | 235...250 | |||
M24x1.5 | Nm | 280...300 | |||
M27x1.5 | Nm | 360 | |||
625 589 00 35 00
Puller