Checking braking system for leaks using pressure gauge · ar4210d0015d · Mercedes-Benz WIS

AR42.10-D-0015D

Checking braking system for leaks using pressure gauge

26.1.01

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (J61) Test connection hydraulic brake

MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU7) National version for Canada

MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU9) National version for Mexico

D42.10-0004-05

1 Test connection for uncontrolled brake pressure

2 Front axle brake caliper

3 ALB controller

4 Test connection, brake pressure controlled

5 Rear axle brake caliper

Fig. item, etc.	Notes on the work
Danger!	Risk of accident. Accidents may result if the vehicle starts off unintentionally with the engine running. Risk of injury. Crushing and burn injuries may result while working on engine during when it is being started or when it is in operation.	Secure vehicle to prevent it from moving. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
Danger!	Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid.	Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Notes on brake fluid	All models	AH42.50-P-0001-01A
	Notes on repairs to brake system	All models	AH42.00-P-0003-01A
	Notes on checking brake system for leaks		AH42.10-N-0001-01A
	Connect test line to master brake cylinder		AR42.10-D-0015-03A
		 Pressure tester	*WH58.30-Z-1004-15A
	Perform low-pressure and high-pressure check on brake system		AR42.10-D-0015-02A
			*000589183100
		Test values for low-pressure check	*BE42.50-N-1001-01A
		Test values for high-pressure check	*BE42.50-N-1002-01A
	Check fluid level in reservoir and correct if necessary		AP42.50-D-4210B

Test values for brake system hydraulics

Number	Designation			Models 690.6, 901, 902, 903, 904, 905	Models WD1/WD2/ WD3/WD6/ WD7/XD1/ XD2/XD3/ XD4/XD5/ XD6/XD7/ YD1/YD2/ YD3/YD4/ YD5/YD6/ YD7


BE42.50-N-1001-01A	Low-pressure check on brake system	Test pressure	bar	2...5	2...5
		Duration of test	min	5	5
		Max. pressure drop	%	-	-
BE42.50-N-1002-01A	High-pressure check on brake system	Test pressure	bar	50...100	50...100
		Duration of test	min	10	10
		Max. pressure drop	%	10	10

000 589 18 31 00

Brake pedal winch

Commercially available tools

Number	Designation
WH58.30-Z-1004-15A	Pressure tester

ah4200p000301a ブレーキ·システムの修理に関する注意事項
ah4210n000101a ブレ一キ·システムの液漏れ点検に関する注意事項
ah4250p000101a ブレーキ·オイルに関する注意事項
ap4250d4210b 油圧ブレ一キ·システムのオイル·レベルの点検および修正
ar4210d001502a ブレ一キ·システムの低圧点検と高圧点検
ar4210d001503a ブレ一キ·マスタ·シリンダへのテスト·ライン接続
as0000z000501a エンジン作動中に車両がひとりでに動き出す危険があります。スタート時または作動中のエンジンに接触すると、巻き込まれて負傷をする、または火傷をする危険があります。
as4250z000101a ブレーキ·オイルは誤って飲用したり、皮フに付着したり、または眼に入ったりすると非常に危険です。