1 | Screw (M18 X 1,5) |
2 | Sealing ring |
3 | Electrical connector |
4 | Clamp |
S12 | Control switch differential lock |
B35.40-0013-06
Blocking | |||
1 | Remove the electrical connector (3) on the control switch differential lock (S12) | ||
2 | Remove the switch control differential lock (S12) the sealing ring (2) | Installation: install a new seal ring (2). | |
3 | Install the screw (1) the housing of the differential lock switch (S12) of 1st shaft | Lifting the rear shaft and check the differential lock by turning the wheel hub. | |
4 | Unlock on the reverse order |