Ring gear with differential
Número | Denominação | Rear axle 745.0 | |||
BA35.30-B-1005-05E | Bolt fastening the 2nd speed locking plate | M10 | Nm | 60...65 | |
337 589 02 31 00
Mounting support
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1002-02A | Chemical lock Loctite 271 | Loctite 271 |
B35.30-0152-01
Install
1 Introduce the planetary gear shafts.
Align shaft holes radially outwards.
B35.30-0153-01
2 Place an intermediate washer in the center of each planetary gear hole.
3 Place on each side of the intermediate washer, in the center of the planetary gear, a bearing needle set (consisting of 33 needles) and a stow washer.
Apply vaseline to the gears to facilitate bearing needle assembly)
B35.30-0158-01
4 Mount the planetary gears with the set of needles on the already installed shafts in the satellite case.
Make sure that each shaft and its planetary gear bear the same identification color (blue or red).
B35.30-0154-01
5 Install the locking plate.
Observe the identification mark alignment between locking plate and satellite case
B35.30-0155-01
6 Install cylinder screws (5) on the locking plate.
Apply chemical lock to screw threads.