Rear axle MS 13.113 |
1 | Semi-shaft |
2 | Wheel hub |
3 | Bolt |
B35.30-0180-11
| Remove | ||
1 | Remove the fastening screws (3) from the flange of the axle shaft (1) | ||
2 | Remove the axle shaft (1) | ||
| Clean | ||
3 | Clean the surface of the flange of axle shaft (1) and of the wheel hub (2) | ||
| Install | ||
4 | Apply silicone on junction surface of the flange of the axle shaft (1) with the wheel hub (2), and around the fastening screws (3). | Prevent that the silicone enters the wheel hub (2). | |
Neutral silicone | |||
5 | Install the axle shaft (1) in the rear axle | ||
6 | Install the fastening screws (3) | Semi-shaft at the axle end |