Test values for drive pinion
Number | Designation | Front axle 731.700 | |
BE33.30-N-1003-02D | Cylindrical roller bearing preload | mm | 0.01...0.05 |
W33.30-1014-01
Clean sealing surfaces before commencing work to avoid measurement errors.
1 Install drive pinion (1) in axle housing without outer shim.
2 Screw in four bolts (2) evenly spaced around the perimeter and tighten to approx. 5 Nm.
3 Spin drive pinion (1) continuously at least 3 time and measure gap (arrow) between flange and axle housing using a feeler gauge.
Thickness of shim = measured value ― cylindrical roller bearing preload