Remove/install front axle drive shaft · ar3330d0100h · Mercedes-Benz WIS

AR33.30-D-0100H

Remove/install front axle drive shaft

15.6.09

MODEL 906 with CODE (ZG1) Engageable all-wheel drive

MODEL 906 with CODE (ZG2) Permanent all-wheel drive

MODEL 906 with CODE (ZG3) Engageable all-wheel drive with gear reduction

MODEL 906 with CODE (ZG4) Permanent all-wheel drive with gear reduction

D33.30-1126-06

1 Shim plate

2 Screw

3 Collar nut

4 Input shaft

5 Bump stop

6 Torsion bar linkage

7 Stop plate

8 Transverse control arms

 	Remove/install
Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Raise vehicle		AR00.60-D-1000H
2	Secure vehicle on vehicle lift		AR00.60-D-0100H
3	Remove front wheel		AR40.10-D-1100H
4	Remove collar nut (3)	 Installation: Replace and lock collar nut (3) in place.	AR33.30-D-0085-03A
			*BA33.20-N-1005-01N
5	Remove drive shaft (4) from front axle gear		AR33.30-D-0100-01H
			*BA33.30-N-1001-07A
		Loctite 262	*BR00.45-Z-1059-02A
6	Remove torsion bar linkage (6) from stabilizer bar		*BA32.35-N-1002-02G
7	Remove bump stop (5)		*BA33.20-N-1002-01N
8	Remove stop plate (7)		*BA33.20-N-1002-01N
9	Unscrew transverse control arm (8) from front axle and pry out	 Refer to Remove/install front axle transverse control arm.	AR33.20-D-1452H
10	Remove drive shaft (4)	 Installation: Apply light coating to splines of drive shaft (4).	*BR00.45-Z-1001-06A
11	Install in the reverse order

 Front axle stabilizer

Number	Designation			Model 906


BA32.35-N-1002-02G	Nut, stabilizer bar linkage to stabilizer bar	M12	Nm	106

Wheel location, hub

Number	Designation				Model 906.11/13/21/23/61/63/71/73	Model 906.15/25/65


BA33.20-N-1002-01N	Bolt, stop plate to transverse control arm/bump stop	M10		Nm	58	58
		M121.5	Stage 1	Nm	106	106
			Stage 2	°	90	90
BA33.20-N-1005-01N	Collar nut, axle shaft to wheel hub	M291.5	Stage 1	Nm	160	160
			Stage 2	°	60	60

Input shaft

Number	Designation		Model 906 with code ZG1, ZG2, ZG3, ZG4


BA33.30-N-1001-07A	Bolt, input shaft to front axle gear	Nm	58

Repair materials

Number	Designation	Order number
BR00.45-Z-1059-02A	Loctite 262	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11