D28.80-0003-01
D28.80-0001-01
D28.80-0002-01
1 Propellor shaft (to front axle)
2 Propellor shaft (to transmission)
4 Bolt
3 Bolt
| Removing, installing | ||
1 | Drain transmission fluid | ||
2 | Detach propellor shafts (1, 2) from reversing gear | Installation: Use new nuts | |
| |||
| |||
3 | Unscrew bolts (3, 4) | Raise reversing gear gently using a suitable lifting device | |
Installation: Use lifting device | |||
4 | Remove reversing gear downwards | ||
5 | Install in reverse order |
001 589 44 21 00
Torque wrench handle
Open-end wrench
000 589 21 01 00
Workshop equipment
WE58.40-Z-1002-05A | Pit lift |