P27.50-2096-06
22a Axial needle roller bearing
22b Shim
22c Retaining ring
22d O-ring
22l Bearing
22s Sun gear
22w Hollow shaft
| Disassemble/assemble | ||
1 | Remove retaining ring (22c), shim (22b) and axial needle roller bearing (22a) | Installation: The needles of the axial needle roller bearing (22a) must face towards the shim (22b). Check retaining ring (22c) is correctly seated. | |
2 | Detach sun gear (22s) from hollow shaft (22w) | Installation: install new O-rings (22d). | |
3 | Remove bearing (22l) | ||
4 | Assemble in the reverse order |