PTO
Número | Denominação | Gearboxes 711.620/622 NA 28-2b (with power takeoff output flange CODE N07) | Gearboxes 711.620/622 NA 28-2c (without power take off output flange CODE N05) | |||
BA26.45-B-1001-01F | Power outlet hydraulic piping support to gearbox | Nm | 38 | 38 | ||
BA26.45-B-1002-01F | Power outlet receiver cylinder | Nm | 13 | 13 | ||
PTO
Número | Denominação | Gearboxes 711.612 NA 28-2B (with power takeoff output flange CODE N07) | Gearboxes 711.612 NA 28-2c (without power take off output flange CODE N05) | |||
BA26.45-B-1001-01F | Power outlet hydraulic piping support to gearbox | Nm | 55 | 55 | ||
BA26.45-B-1002-01F | Power outlet receiver cylinder | Nm | 13 | 13 | ||
PTO propeller shaft
Número | Denominação | Gearboxes 711.62 | |||
BA41.20-B-1001-01C | Attachment screws of transmission flanges with power outlet | M8 | Nm | 23 | |
M10 | Nm | 60 | |||
M12 | Nm | 100 | |||
D26.45-0001-01
1 Loosen the connector (16) of the switch (arrow) in the PTO connection and remove it.
D26.45-0002-01
2.1 Remove the transmission shaft from the PTO (code N07), .
2.2 Remove the hydraulic pump (code N05).
D26.45-0003-01
3 Remove the hydraulic pipe (17) from the PTO reception cylinder
Installing: Bleed the hydraulic pipe system.
4 Remove the gearbox support (18), .
5 Install in reverse order.