1 | Engine stabilizer mount |
2 | Bolts |
3 | Front axle carrier |
D22.10-1138-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Remove lower engine compartment paneling. | If installed. | |
3 | Remove screw/bolts (2) . | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Installation: Replace screw/bolts (2). | |||
Bolt, engine stabilizer mount to engine | |||
Screw/bolt, engine stabilizer mount to front axle carrier | |||
4 | Remove engine stabilizer mount (1). | For this purpose, swivel engine stabilizer mount (1) out of front axle carrier (3). | |
5 | Install in the reverse order |
参照文書
- ah0000n000101a セルフロッキング·ナットおよびボルトに関する注意事項
- ah0000p002001a 回転角度で調整する締付法にしたがい作られたボルト接続部の注意事項
- ah0060n010001ts リフト·アップおよびジャッキ·アップに関する注意事項
- ar0060d100004ts
- ar6120d1105ts
- as0000z001001a 車両がリフトから滑り落ちたり、傾くことによる生命の危険