Coolant pump, coolant thermostat
Number | Designation | Engine | |||
BA20.10-N-1001-01S | Bolt, coolant pump to timing case cover | M7 | Stage 1 | Nm | 10 |
Stage 2 | Nm | 25 | |||
BA20.10-N-1002-01S | Bolt, coolant pump to crankcase | M8 | Stage 1 | Nm | 5 |
Stage 2 | Nm | 20 | |||
D20.10-1113-06
Pay attention to the differing diameters and lengths of the bolts (1 to 12).
Bolts (1 to 8) M728
Bolts (9 to 11) M875
Bolt (12) M8110
Removal
1 Unclip (arrow) electrical line at the coolant pump (A)
2 Unscrew bolts (1 to 12).
Installation: Screw in bolts (1 to 12) in the numerically ascending order. Observe tightening torque.
3 Remove the coolant pump (A) from the timing case cover.
Installation: Install new gasket
4 Install in the reverse order.