Oil cooling system
Number | Designation | Engines | |
BA18.30-N-1002-01C | Bolt, housing cover to oil-water heat exchanger | Nm | 25 |
D18.30-0051-01
1 Unscrew bolt (1.1) at oil-water heat exchanger and take housing cover (1.2) off the heat exchanger (1.3).
Installation: When tightening the bolt (1.1), ensure that the housing cover (1.2) and the gasket (1.4) do not shift.
If possible, do not tighten bolt (1.1) fully until after fitting on the oil-water heat exchanger.
Pay attention to tightening torque.
2 Take gasket (1.4) out of the housing cover (1.2).
Installation: Replace gasket (1.4), note installation position.
3 Assemble in the reverse order.