ar0941t8681cb

Remove/install charge air manifold

種別 ar · トピック 09.41 · バージョン 0102 · 2012-02-16

適用: ENGINES 457.944 in model NMB613.367

「ja」では利用できません。英語で表示しています。

位置付け

機能グループ 1 エンジン › 09 エア・インテーク、過給機 › 09.41 ブースト・エア・パイプ、インタ・クーラ — シリーズ 613（モデル 367）

EinPAS 15 エンジン › 15.30 エアインテーク/過給 › 15.30.33 インテークマニホールド/ブーストエアパイプ — シリーズ 613（モデル 367）

エンジン/トランスミッションにも適用: 457 944

AR09.41-T-8681CB

Remove/install charge air manifold

15.2.12

ENGINES 457.944 in model NMB613.367

Remove/install charge air manifold

T09.41-0051-11

1 Charge air pipe

2 Charge air manifold

3 Compressor intake air noise damper

4 Coolant pipe bracket

5 Boost pressure/charge air temperature sensor electrical connector

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnecting the battery

AR54.18-T-0002CB

2

Open maintenance flap

- Engine compartment flap at rear

- Right rear maintenance flap

- Interior flap above engine.

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

3

Remove charge air pipe (1) of charge air manifold (2)

AR09.41-T-8681-01CB

*BA09.41-N-1001-01H

*BA09.41-N-1002-01H

4

Remove compressor intake air noise damper (3)

5

Remove bracket for engine wiring harness and bracket for coolant pump (4)

6

Remove engine start/stop button

7

Unlock and disconnect boost pressure/charge air temperature sensor electrical connector (5)

8

Remove charge air manifold (2) from cylinder heads

Installation: Clean sealing surfaces, replace gaskets.

*BA09.41-N-1003-01H

9

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
457.9

BA09.41-N-1001-01H

Clamp, charge air hose to charge air pipe

M5

Nm

8

M6

Nm

10

BA09.41-N-1002-01H

Bolt, charge air pipe to charge air manifold

Nm

60

BA09.41-N-1003-01H

Bolt, charge air manifold to cylinder head

Nm

30

参照文書