Remove/install turbocharger oil feed line

AR09.40-D-6035TSC

Remove/install turbocharger oil feed line

15.01.2019

Engine

274 in model 907

1

Oil line

5

Screw

6

Screw

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove air intake pipe.

AR09.10-D-8131TSC

2

Remove screw (6) and remove oil line (1) from the exhaust gas turbocharger.

 Installation: Replace seal.

 Bolt, oil feed line to exhaust gas turbocharger

*BA09.40-N-1004-02F

3

Remove screw (5) and remove oil line (1).

 Installation: Replace seal.

 Bolt, oil feed line to crankcase

*BA09.40-N-1005-02F

4

Install in the reverse order



Check

5

Check engine oil level, correct if necessary.



AP18.00-D-0101TSC



Specified engine oils (service) - Overview

BB00.40-P-0223-02A

 Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Perform engine test run. While doing so, check engine for proper operation and leak tightness.

 Turbocharger

Number

Designation

Engine 274 in model 907

BA09.40-N-1004-02F

Bolt, oil feed line to exhaust gas turbocharger

Nm

9

 Turbocharger

Number

Designation

Engine 274 in model 907

BA09.40-N-1005-02F

Bolt, oil feed line to crankcase

Nm

9