1 | Air intake pipe |
2 | Electrical connectors |
3 | Electrical wiring harness |
4 | Hose |
5 | Clip |
6 | Clip |
7 | Hot film mass air flow sensor |
D09.10-1133-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | Omnibus | |
Topical note | Notes on avoiding damage through contamination and foreign objects | Leichte Transporter | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Release clip (6). | Installation: Check clamp (6) for damage. | |
Clamp, air intake pipe to hot film mass air flow sensor | |||
Depending on the findings, | |||
| |||
Replace damaged clamp (6). | |||
2 | Disconnect electrical connectors (2). | ||
3 | Remove electrical wiring harness (3) from air intake pipe (1). | Installation: Replace required cable ties. | |
4 | Remove air intake pipe (1) from hot film mass air flow sensor (7). | ||
5 | Remove hose (4) from air intake pipe (1). | ||
6 | Release clamp (5). | Installation: Check the clamp (5) for damage. | |
Clamp, air intake pipe to turbocharger | |||
Depending on the findings, | |||
| |||
Replace the damaged clamp (5). | |||
7 | Remove air intake pipe (1). | Installation: Check seals. | |
Depending on the findings, | |||
| |||
Replace seals. | |||
8 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Check for leaktightness when engine is running. | Visual inspection only. |
参照文書
- ah0000n500001h 汚れおよび異物による損傷防止に関する注意事項
- ah0000p500001a 汚れおよび異物による損傷防止に関する注意事項
- ah5400p000101a 静電気放電による電子構成部品の損傷を防ぐための注意事項
- as0000z000201a 高温になっているか、あるいは赤熱している部品を取り扱う場合に、火傷を負うあるいは失明する危険があります。
- as0000z000501a エンジン作動中に車両がひとりでに動き出す危険があります。 スタート時または作動中のエンジンに接触すると、巻き込まれて負傷をする、または火傷をする危険があります。