1 | Engine air intake duct |
2 | Clip |
3 | Clip |
4 | Cable tie |
5 | Electrical line |
D09.10-A005-06
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Release clamp (2) and remove engine air intake duct (1) from air filter housing. | Engine air intake duct clamp | |
2 | Separate cable ties (4) and place electric line (5) to one side. | Installation: Replace cable ties (4). | |
3 | Release clamp (3), remove engine air intake duct (1) from the air intake pipe of the exhaust gas turbocharger and remove engine air intake duct (1) upward. | Engine air intake duct clamp | |
4 | Install in the reverse order | ||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Perform engine test run. While doing so, check engine for proper operation and leak tightness. |
参照文書
- ah0000p500001a 汚れおよび異物による損傷防止に関する注意事項
- as0000z000501a エンジン作動中に車両がひとりでに動き出す危険があります。 スタート時または作動中のエンジンに接触すると、巻き込まれて負傷をする、または火傷をする危険があります。
- as4900z000101a エグゾースト・システムおよび接続している構成部品での作業 では、火傷、窒息、および中毒の危険があります。 排気ガスの気体および固体の成分を吸い込むことによる窒息 �