1 | Screw |
B6/29 | Intake camshaft Hall sensor |
D07.04-1299-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
2 | Remove cover of cylinder head cover. | ||
3 | Release and disconnect electrical connector of the intake camshaft Hall sensor (B6/29). | ||
4 | Remove screw (1) of the intake camshaft Hall sensor (B6/29). | Screw/bolt, camshaft position sensor to cylinder head cover | |
5 | Remove intake camshaft Hall sensor (B6/29). | Installation: Replace sealing ring. | |
6 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform engine test run. While doing so, check engine for proper operation and leak tightness. |
参照文書
- ah0000p500001a 汚れおよび異物による損傷防止に関する注意事項
- ah5400p000101a 静電気放電による電子構成部品の損傷を防ぐための注意事項
- ar0120d5015tsc
- as0000z000201a 高温になっているか、あるいは赤熱している部品を取り扱う場合に、火傷を負うあるいは失明する危険があります。
- as0000z000501a エンジン作動中に車両がひとりでに動き出す危険があります。 スタート時または作動中のエンジンに接触すると、巻き込まれて負傷をする、または火傷をする危険があります。
- as0000z001701a 先の鋭がった部品による切り傷または擦り傷などの負傷の危険があります。
- as4900z000101a エグゾースト・システムおよび接続している構成部品での作業 では、火傷、窒息、および中毒の危険があります。 排気ガスの気体および固体の成分を吸い込むことによる窒息 �