D07.04-1246-09
1 | Electrical connector | 4 | Electrical line | 7 | Electrical line | ||
2 | Circulation pump | 5 | Clamp | 8 | Clamp | ||
3 | Bracket | 6 | Heat shield | 9 | Screw |
10 | Electrical connector |
11 | Screw |
12 | Hoses |
13 | Differential pressure sensor |
D07.04-1247-06
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Remove/install | ||
1 | Remove air filter housing | ||
2 | Disconnect electrical connection (1) | ||
3 | Remove circulation pump (2) from bracket (3) and move out of the working area | ||
4 | Remove electric lines (4) with clip (5) from heat shield (6) | Installation: Check clip (5) for damage. | |
Depending on findings | |||
| |||
Replace damaged clip (5). | |||
5 | Remove electric line (7) with clip (8) from heat shield (6) | Installation: Check clip (8) for damage. | |
Depending on findings | |||
| |||
Replace damaged clip (8). | |||
6 | Remove bolt (9) | M6 | |
7 | Remove heat shield (6) upward | Installation: Ensure that heat shield (6) is seated correctly. | |
8 | Disconnect electrical connection (10) | ||
9 | Remove screw (11) | Bolt, differential pressure sensor to bracket | |
10 | Remove hoses (12) from differential pressure sensor (13) | Removal: Mark assignment of the hoses (12) relative to the differential pressure sensor (13). | |
Installation: Observe assignment of hoses (12). | |||
11 | Remove differential pressure sensor (13) | ||
12 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Check for leak tightness with engine running | Visual inspection only. |
参照文書
- ar0910d1150tsf
- as0000z000201a 高温になっているか、あるいは赤熱している部品を取り扱う場合に、火傷を負うあるいは失明する危険があります。
- as0000z000501a エンジン作動中に車両がひとりでに動き出す危険があります。 スタート時または作動中のエンジンに接触すると、巻き込まれて負傷をする、または火傷をする危険があります。
- as0000z001701a 先の鋭がった部品による切り傷または擦り傷などの負傷の危険があります。
- as4900z000101a エグゾースト・システムおよび接続している構成部品での作業 では、火傷、窒息、および中毒の危険があります。 排気ガスの気体および固体の成分を吸い込むことによる窒息 �