Replace rear radial shaft sealing ring

AR03.20-D-3003TSR

Replace rear radial shaft sealing ring

24.08.2020

Engine

651 in model 907, 910

1

Radial shaft sealing ring

2

Crankshaft

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A



Remove

1.1

Remove flywheel.

Engine 651 in model 907 with transmission 711.6
Engine 651 in model 910 with transmission 700.76

Engine 651 in model 907 with transmission 711.6

AR03.30-D-8002TSR

Engine 651 in model 910 with transmission 700.76

AR03.30-D-8002TSF

1.2

Remove drive plate.

Engine 651 in model 907 with transmission 722.9
Engine 651 in model 910 with transmission 700.75

Engine 651 in model 907 with transmission 722.9

AR03.30-D-8003TSR

Engine 651 in model 910 with transmission 700.75

AR03.30-D-8003TSF

2

Use a screwdriver to press out radial shaft sealing ring (1).


Use a suitable, soft base (e.g. a rag) between the screwdriver and the crankshaft (2).
Damage may occur otherwise.



Install

3

Install radial shaft sealing ring (1).

AR03.20-D-3003-01TSR

 Replace radial shaft sealing ring (1).

 Insertion tool

*651589016100

4.1

Install flywheel.

Engine 651 in model 907 with transmission 711.6
Engine 651 in model 910 with transmission 700.76

Engine 651 in model 907 with transmission 711.6

AR03.30-D-8002TSR

Engine 651 in model 910 with transmission 700.76

AR03.30-D-8002TSF

4.2

Install drive plate.

Engine 651 in model 907 with transmission 722.9
Engine 651 in model 910 with transmission 700.75

Engine 651 in model 907 with transmission 722.9

AR03.30-D-8003TSR

Engine 651 in model 910 with transmission 700.75

AR03.30-D-8003TSF

5

Check oil level.



Low SPAsh multigrade service engine oils (specification 228.51)

BB00.40-P-0228-51A



Low SPAsh multigrade service engine oils (specification 229.31)

BB00.40-P-0229-31A


The oil level must not lie above the maximum marking.
Engine damage can occur otherwise.

Depending on the findings,



Correct oil level.



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness when engine is running.

 Visual inspection only.