Inspection data of crankcase
Number | Designation | Engine | ||
BE01.40-N-1013-02B | Crankcase flatness of separating surface | over the entire length | mm | 0.030 |
over a length of 150 mm in longitudinal and transverse direction | mm | 0.015 | ||
D01.30-0052-01
1 Use knife-edge straightedge (2) to measure flatness of cylinder head contact surface (1) over its entire length and diagonally.
If a light gap is formed
2 Use a feeler gage (0.04 mm) to inspect permissible variation.
It must not be possible to insert the feeler gage (0.04 mm) between crankcase contact surface (1) and knife-edge straightedge (2).
If the inspection is carried out in the transverse direction, the permissible variation stated is merely a reference value and cannot be measured.