Remove/install cover with radial shaft sealing ring · ar0140d8925tsc · Mercedes-Benz WIS

AR01.40-D-8925TSC

Remove/install cover with radial shaft sealing ring

06.03.2020

Engine

274 in model 907

Remove/install cover with radial shaft sealing ring

2	Pulse ring
3	Crankcase
4	Oil pan top section
5	End cover
5a	Bolts
5b	Bolts
6	Radial shaft sealing ring

D15.12-A001-06

 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
	Remove
1	Remove pulse ring (2).		AR15.12-D-0001TSC
2	Remove crankshaft position sensor and place to one side with electric line connected.		AR07.04-D-0059TSC
		 Do not disconnect electrical connector.
3	Clean crankcase (3) and oil pan top section (4) in area of end cover (5).	Assembly cleaner	*BR00.45-Z-1028-04A
4	Remove screws (5a, 5b).
5	Remove end cover (5) with radial shaft sealing ring (6) from crankcase (3).
	000 588 00 84 00 Heat gun		WS54.00-P-0049B
		 Do not pound in any tool between the end cover (5) and crankcase (3) to remove. The sealing surfaces can get damaged otherwise.
		 Position tool for removing at the side notches of the end cover (5). Warm up sealant as required.
	Clean
6	Clean sealing surfaces.		AR01.00-P-0050-01A
	Notes on application of flange sealants to seal major assemblies		AH00.00-P-0500-01MNE
		Loctite 7063 (400 ml) cleaning spray	*BR00.45-Z-1046-04A
		Loctite 7200	*BR00.45-Z-1038-04A
	Install
7	Install end cover (5).		AR01.40-D-8925-01TSC
		Loctite 7200	*BR00.45-Z-1038-04A
		Sealant, Loctite 5970, 50 ml	*BR00.45-Z-1013-01A
		Assembly cleaner	*BR00.45-Z-1028-04A
		 Bolt, end cover to crankcase	*BA01.40-N-1002-01I
		 Installation tool	*271589004300
8	Install crankshaft position sensor.		AR07.04-D-0059TSC
9	Install pulse ring (2).		AR15.12-D-0001TSC

 Crankcase, timing case cover, end cover

Number	Designation		Engine 274 in model 907
BA01.40-N-1002-01I	Bolt, end cover to crankcase	Nm	9

271 589 00 43 00

Installation tool

Repair materials

Number	Designation	Order number
BR00.45-Z-1013-01A	Sealant, Loctite 5970, 50 ml	A 003 989 98 20 10
BR00.45-Z-1028-04A	Assembly cleaner	A 000 986 56 01
BR00.45-Z-1038-04A	Loctite 7200	Henkel AG & Co. KGaA http://www.loctite.de
BR00.45-Z-1046-04A	Loctite 7063 (400 ml) cleaning spray	A 001 986 71 71 09

参照文書

ah0000p050001mne ユニットのシーリングのためのサーフェスシーリングコンパウンドの塗布に関する注意事項
ah0000p500001a 汚れおよび異物による損傷防止に関する注意事項
ar0100p005001a シーリング·コンパウンドの取除き
ar0140d892501tsc
ar0704d0059tsc
ar1512d0001tsc
as0000z001701a 先の鋭がった部品による切り傷または擦り傷などの負傷の危険があります。
ws5400p0049b 000 588 00 84 00 ホット・エア・ガン