T14.15-0016-02
Illustration with a view of the engine compartment, maintenance flap on the rear left open
1 Depressurize ancillary consumer compressed-air circuit
2 Detach the compressed-air line and the compressed-air pipes (1).
3 Remove the screw (2) and remove the control valve exhaust flap (3).
T01.10-0020-11
Illustration with view of the engine compartment,
maintenance flap in the interior compartment open
4 Loosen the electrical connectors (4) on the pump-line-nozzle control module (5) and detach the cable set from the engine.
Installation: Attach the cable set with new tie straps.
5 Detach the fuel lines from the pump-line-nozzle control module (5) and the pump-line-nozzle control module (5) from the engine.
Collect the effluent fuel if required.
6 Detach the oil hose with oil filler plug (6) from the oil pan.
7 Remove the oil dipstick guide tube (7).
8 Detach the compressed air reservoir and the solenoid valve (8) from the bracket and from the tubes.
9 Remove screws (arrows) and detach the power steering pump (9) from the air compressor.
Leave the power steering pump with the attached lines suspended.