AN43.40-W-1001-05PR | Attach adhesive label to heat shield, transmission and interior trim | ||
Danger! | Risk of death caused by working on permanent magnet retarder for groups of persons with implants. Risk of injury caused by burns that may occur due to contact with the hot rotor. | For persons with implants, a minimum distance of 30 cm between the permanent magnet retarder and the body parts of the affected person is to be maintained as a safe distance from the permanent magnet retarder. Do not touch hot or rotating parts. |
W43.40-1078-06
1 Stick new adhesive label (1) into trim (2).
W43.40-1086-11
2 Clean bonding area on heat shield (4).
3 Glue adhesive label (3) onto heat shield (4).
W43.40-1087-08
4 Clean bonding areas on transmission (7).
5 Stick adhesive label (5) at top right in direction of travel onto an easily visible free area on the transmission (7).
6 Stick adhesive label (6) at bottom left in direction of travel onto an easily visible free area on the transmission (7).
参照文書
- as4340z000101a 人工臓器を装着した人が永久磁石リターダの作業を行うと生命の危険があります。高温のロータに触れると火傷して負傷の危険があります。