Prepare installation area for external filling connection of compressed-air system

L42.20-0041-06

Entrance area with angle bracket

1 Entrance

2 Angle bracket A 670 666 02 12

a Location of bore hole,
Dimension a = 147 mm

b Location of bore hole,
Dimension b = 320 mm

c Location of bore hole,
Dimension c = 15 mm

1 Drill two holes  9 mm in the entrance (1), as shown in the figure.

2 Drill a hole in the angle bracket A 670 666 02 12 (2) in the side which has not already been drilled. The hole should have a  of 9 mm and be 15 mm from the edge of the entrance (1).

3 Install in the following order:

 Angle bracket A 670 666 02 12 (2)
 Bracket of filling valve
 Bracket at entrance (1)

The parts are secured to the reverse side of the entrance (1) using four hexagon bolts M8X20 (ISO 4017-M8X20-10.9), washers 8.4 (DIN 9021-8.4-140 HV) and hexagon nuts M8
(MBN 10113-M8-10-A).