Correct form of positioning the connection hose (3) and of the constant torque clamps (2), on ducts (1) of air intake
Conveniently position the connection hose (3) on ducts (1), observing the value of the distance (D), which has to be approximately 6 mm. Next, tighten the clamps (2) to the specified torque and check all joining points for perfect tightness.
B09.41-0008-01
Incorrect form of positioning the constant torque clamps (2)
The displacement of the clamps (2), can be caused by lack of torque.
B09.41-0009-01
Incorrect form of positioning the constant torque clamps (2)
Under no circumstances install the clamps (2) on the collars of the tubes (1). Such procedure will result in insufficient fastening, that could cause the displacement of the clamps (2) due to the movement of the hose (3).
B09.41-0010-01
Incorrect form of positioning the constant torque clamps (2)
Misplaced clamps can cause cuts and/or shearing of the hose (3), which will result in penetration of dirt in the engine.
B09.41-0011-01